How To Repair Vinyl Office Chair Armrest and Arms on Furniture

Affiliate Disclaimer

As an affiliate, we earn from qualifying purchases. We get commissions for purchases made through links in this post.

Office chairs are often used by people who sit at their office desk for hours on end. Over time, wear and tear can take its toll on the chair, making it more difficult to use. This article will help you to identify and offer some easy ways on how to repair vinyl office chair armrest.

If you have a vinyl chair, you have to take care of them because they can cause damage over time, even if they don’t look damaged right away. If you are like me and the chair looks bad at first glance, but notices after a few weeks or months — this makes sense!

how to repair vinyl office chair armrest
flash sale special offers mega sale

How do I remove my office chairs cracked vinyl armrest?

The first step in removing your chair armrest is to find the screws that secure the armrest in place. These are commonly located at the rear of the chair. You will need a small screwdriver to remove these screws. Once the armrest is removed, you will see how easy it is to clean the seat of your chair. Take care not to damage the seat or chair mechanism.

What tools do I need to fix my vinyl office chair armrest?

The tools you need depend on what type of vinyl armrest you have. You may need a Phillips screwdriver to unscrew the screws, or a flat-head screwdriver. You’ll also need a vinyl repair kit which you can purchase online here.

A pair of scissors, a bucket of warm water and soap with a damp cloth. Having a can of compressed air is good also to clear any loose debris. Duct tape and maybe even a small tube of super glue, these are optional and may not be needed.

Why does vinyl crack or split?

A common office chair issue is sagging armrests. As you’ve probably noticed, this problem can make it hard to comfortably type or use your mouse. Luckily, there are two quick solutions for this problem.

The first is to fill the gap with an elastic band that provides some resistance when stretched.

The second solution is replacing the armrests altogether with new ones, which are typically sold in sets of two.

If I just want a new vinyl armrest for my office chair, am I’m going to have to pay for a new chair?

No. Vinyl armrests are actually fairly cheap for the amount that you can get replacement arms.

How to Repair Vinyl Office Chair Armrest Guide

How do I care for my vinyl office chair armrest?

Vinyl Chair Cleaning is possible using damp towels and mild soap. If you noticed scratches on your armrests, wash them in warm water with soap. Be cautious to clean out armrests before storing them. Vinyl arm rests can get broken by heavy weight and usage. If an armrest is broken in a vinyl chair, try removing it.

Tell me the best office chair arm repair replacement?

The most popular armrest is the type that hinge. The armrest is attached to a chair by adjusting its hinged position. This armrest is folded in a single position to help facilitate storage. Vinyl armrests can be used as replaceable hinge types, but are most commonly applied to chairs with leather and cloth fabrics If you have the model number of your chair its easy to check online for replacement parts. Vinyl upholstery and leather repair kits for office chairs are easily found online.

Also See  Easy Steps to Lower and Raise an Office Chair with a Lever: A Complete Guide


How can I clean and maintain vinyl?

Most office chairs are easy to clean and maintain with a damp cloth and soap if the arm is vinyl or plastic materials. Fabric or upholstery is generally more durable but harder to clean.

Here are the some tips for repairing vinyl office chair armrest:

1. First, you need to clean and renew the vinyl office chair armrest so that it looks like new again. You can do this by using a cloth or even a reusable microfiber cloth. Carpet cleaning products are also useful for cleaning up a vinyl office chair armrest.

2 . You have to do some tests on the seat of your office chair before you fix it with adhesive; so that you can see how your repair works before you install it in your chair.

3 . If the broken area is not visible on the seat, you should use an adhesive tape to repair your chair’s seat; otherwise, this will leave a crack on the seat.

4 . Before doing any repairs, always wear gloves when working with glue so as not to get hurt if any part of them gets stuck in your fingers while fixing your chair’s seat.

Can I fix my vinyl office chair armrest myself or do I need to take it in for professional repair?

This total depends on your comfort level when it comes to repairing the chair arm or chair pads. If you have decided to tackle the task, make sure you have the right size armrest that match the other chair arm and the screw holes are the same.

If you still have questions or concerns, a professional is the best choice. Some tools that you will need are an adjustable wrench, a flat head screw driver, and a Phillips head screw driver. Make sure to have some lubricant available to reduce the chances of damaging the armrest.

You will need some vinyl patches or vinyl repair kits, some rubbing alcohol and a few q tip applicators to get started.

How do I know if my vinyl office chair armrest needs replacing?

The armrest needs replacing if you have a chair arm or arm pads that are cracked, dented, or has a hole in it. It also needs to be replaced if the screws that hold the armrest in place are loose or come loose easily. If you notice the armrest is damaged in any way, it is time for a new one.

Do I need to replace the entire armrest?

The armrest itself is not damaged, so replacing the entire armrest is not necessary. However, you may want to replace the armrest because the armrest cover may be damaged. If you are looking to replace the entire armrest, you can use the cover as a new one. The armrest cover can be purchased for a minimal amount that won’t break the bank.

You could also opt to repair the armrest if it has a small affected area that can be easily repaired without having to replace the whole thing.

How to Repair Vinyl Office Chair Armrest

Step by Step Guide: It is a small part so easy to replace, but in many cases it can be very difficult to do. If you find it broken, or if you have the original armrest, you must know how to repair vinyl office chair armrest.

Step 1: You can wash your arm rest with water and a wet cloth. You need to remove any dirt, oils, body liquids such as sweat or oil on the surface of it first.

Also See  What is the best kind of desk chair for long hours?

Step 2: Clean the whole armrest or just an extra inch on either side of the affected area so the repair will stick to the other material.

Step 3: Before polishing the surface, make sure you have a clean rag on hand. You must remove the armrest from its current position in order to clean it with a paper towel. You want to get rid of as much soap as you can. You can do this with one clean towel. Let the vinyl sit for a while, then wipe it off.

Step 4: Some home repair retailers have a large assortment of sandpapers. Once you have your armrest, you can lightly scrub over the problem area with the help of sandpaper. Sand according to two light coats, wait 30 minutes, and then sand lightly yet again, as you do not want to ruin the topcoat.

Step 5: Now, your repair kit contains accessories and patches for vinyl material. Depending upon the vinyl you choose, the steps will differ. For liquid vinyl, add paint to tint it the same as the rest of the chair. In order to apply paint afterwards, follow all directions in your kit.

Step 6: When using vinyl for painting, you need a spatula to spread the first layer of vinyl about 1 inch beyond the edges of the project, and you can use it to apply a thin coat of glue. After the primer and sealer are put on evenly, it will be the base behind your paint project.

Unless the vinyl patch perfectly fits the crack, you will need to cut a patch to the proper size. Make sure you fit it over the crack completely. The paint that matches the chair should be combined with that which should be coated with the touching-up patch. It must be placed over the area of damage.

The edges of the vinyl’s surface need to be pressed underneath the area of your skin where the patch is to be applied. Press the patch down while applying it, so that the entire surface is pressed firmly.

Step 7: To repair an old vinyl damaged by solvents, start by cleaning off the damage with a heat gun and a clean cloth. Use a small foam brush or soft cloth to apply a thin coat of latex clear-coat to the surface. Wait until the coating has fully dried to reapply the new wallpaper. The affected area should be dry with hair dryers to speed up the recuperation process.

If it’s beginning to clump up, it might be a good idea to wash it. Be sure to follow the directions on your kit when using patches. You will need to apply even more layers of patches and glue. Some kits may also require you to do different actions.

Step 8: After applying the adhesive with the cotton swab or Q-tip, wait 30 seconds before you brush off any excess. You can wrap up the smoothing process using just a little sandpaper. It will then look smooth and polished in one quick motion.

Step 9: You will need to apply a leather treatment layer to the armrest prior to setting up the leather. This option is possible, and you may decide on it, or it is not necessary for you to put forth the effort.

Step 10: Lightly lay the adhesive on the leather and position it on the vinyl workspace. Don’t press on the armrest of this chair or shift it whatsoever while this is being carried out. These actions will result in lines and folds on your newly applied vinyl, as well as wrinkles in your chair. Be extremely careful.

Also See  Key Factors on the Price of Chair Costs for the Office

Repairing your own office chair is easier than you think!

Armrests are a big part of any office furniture. They provide comfort and support for the user. Most importantly, armrests can be easily repaired if needed.

Reaching for an armrest is a frustrating process to begin with, because the surface on which you’re sitting is not always flat or smooth. You could choose to go without one by just buying a chair that has one built in or you could try repairing it yourself with some simple tools and materials.

The first step in repairing your vinyl office chair armrest is finding out what type of repair you’re going to do on it. Make sure that your armrest is not cracked or broken into pieces – either way, it will require some work before it can be fixed properly. The next step involves cleaning vinyl spills, holes, and other debris that may have accumulated on the surface of the chair or other chairs in your office.

Checking up on the material used to make your chair’s armrests will also help figure out how much time you need to spend repairing it; vinyl tends to stretch over time depending on how often it’s used, so there could be some work involved in order for your vinyl office chair armrest to last as long as possible.

Once you’ve completed this step, the next thing to do is access all of the screws from your chair should they be exposed underneath the surface of the chair where you sit; this will allow them to be removed safely from underneath where they may otherwise get lost under normal use and storage over time. Once these screws are removed, all that remains is cleaning and replacing any missing screws with new ones – but why would you? There isn’t anything more annoying than having rusting metal scraping against your skin while trying to move around in a chair!

Repairing any damaged or missing parts of an office desk will also require some time spent doing this job – but again, why would anyone want their furniture sitting in a mess when they have all kinds of neat tools at their disposal now?

Finally, once your furniture has been repaired, reassemble everything so that it looks like new again – even though nothing was broken! It might sound like a daunting task but odds are there are more than enough supplies at home for someone who cannot do it themselves! 😉

Tips for keeping the armrests in good shape for a long time

The vinyl office armrest is the most common and basic kind of armrests. It’s very common because it’s cheap and easy to replace, as well as it has a long lifespan. The vinyl armrest can be damaged easily if it’s not in good condition, but there are a few steps that you can take to repair it.


If you’re unhappy with your vinyl office armrest, this guide will provide you with step-by-step instructions on how to repair it. These instructions are a must if you want to avoid ruined furniture and expensive repairs.

Your vinyl office chair armrest is undoubtedly one of the most important parts of your furniture. Keeping it in great condition has a huge impact on your performance and comfort. If you’re unhappy with the way things are going, here’s how to repair it for a long time to come!

Also Read: Are Office Chairs Better Without Arms – Which is better?

Also worth reading: Ergonomic Armless Chairs for Your Home Office

Also worth reading: Clever Under Desk Storage Ideas to Help Organize Your Space

Also worth reading: How do I keep my chair wheels from rolling? A Simple Guide